Lennox Furnace E227 Error Code
What the E227 code means
On newer Lennox furnaces (EL296, SL280, SLP98, ML296 and similar) showing three-digit codes from the Lennox Residential Communicating Systems Alert Code Guide, E227 means the low pressure switch opened in run mode — draft was proved, then lost while the furnace was running (seven-segment wording: pressure switch opened during ignition or run).
Likely causes
- Vent or intake blocked during run
- Condensate backing up during run
- Failing inducer motor
- Intermittent pressure switch
How to fix it — step by step
- Clear the outdoor terminations
- Check the condensate drain hose for clogs, kinks or freezing
- Reset power once and watch a full cycle
- Call a technician if it recurs, to test draft and the inducer
Parts that commonly fix the E227 code
- pressure switch - Shop at RepairClinic
- inducer motor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.