Rheem Furnace 34 Error Code

What the 34 code means

Induced draft (inducer) motor overcurrent on Rheem R801V furnaces with the 7-segment diagnostic display. The inducer motor is drawing too much current.

Likely causes

  1. failing inducer motor
  2. blocked inducer or vent causing overload
  3. inducer wiring fault

How to fix it — step by step

  1. Check the thermostat is set to Heat and calling for heat
  2. Check the outdoor vent and intake pipes are clear of snow, ice or debris
  3. On a high-efficiency model, check the condensate drain line and trap are not clogged or frozen
  4. Turn power off at the furnace switch for 30 seconds, then back on, and try one heat call
  5. If the code returns, stop resetting and call a licensed HVAC technician

Parts that commonly fix the 34 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Rheem furnace error codes

See all Rheem furnace codes & guides →