Trane Furnace E6.3 Error Code

What the E6.3 code means

On Trane S-series furnaces with a seven-segment display (S9X1, S9X2, S9B1 and S8X1, S8X2), code E6.3 means an igniter fault — the igniter relay has failed or the igniter is open.

Likely causes

  1. Burned-out or cracked hot surface igniter
  2. Failed igniter relay on the control board
  3. Loose igniter connector

How to fix it — step by step

  1. Confirm the thermostat is calling for heat
  2. Reset power once and listen for the start sequence (inducer, then ignition attempt)
  3. If there is no ignition and the code returns, stop resetting
  4. Call a technician to test igniter resistance and replace the igniter or board

Parts that commonly fix the E6.3 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Trane furnace error codes

See all Trane furnace codes & guides →